Our latest technology
CAPACITY CALCULATION BY TFM
-
Stringer cycle time (in sec) 70 sec / panel
-
Lamination capacity pcs (nos. 1 Ecolam MAX 5 DS) 10 pcs per cycle
-
Lamination Cycle time** 14 min/h**
-
Cycles per hour 4 cycles/h
-
Net Laminator capacity per hour 43 panels/h
-
Laminator cycle time (in sec) 84 sec/panel
-
Automation cyle time (in sec) 28 sec/panel
TO BE DEFINED. Calculation capacity considered on a 144 Half Cells module.
*module design to be provided
Half-cut cells modules with centralized interconnection and nos. 3 centralized Jbox Standard Glass Backsheet Suitable for Bifacial solar cells Standard & PERC high efficiency solar cells
- Min module size WxL = 850 x 1.650 mm
- Max module size WxL= 1.350 x 2.300 mm.
- M6 (166mm) M10 (182mm) M12 (210mm) full and half
- from 6BB to 12BB. nos. 3 centralized Jbox
- : 400V+3P+N, 50-60Hz (to be provided full FUM data at order confirmation)
- : Motor size 20-25 kW, 6 Bar, 5000 litres (to be provided full FUM data at order confirmation)
- : 18°C-25°C
- : 50 to 70%
- : Below 50% (specially for EVA)
- : 800 kg/sqm
- 6 meteres
Amrophous Silicone Solar Panels
Trusty & Reliable
The BEST solar power technology solution for The Middle East climate, conditions and needs
- Best tolerance of and performance in warm temperatures compared to all other solar panels
- Best tolerance of and performance in lower-light conditions due to clouds, rain, sun rising/setting, shade
- Best tolerance of and performance in reduced light due to dust, sand (including surface-scratching), dirt
- Lowest maintenance of all solar power technologies
- Most versatile: lightweight, thin, works at all angles, can be semi-transparent = ideal for many uses
Advanced Waste to Energy Solution
Precise Performance
Shredded tires are instantly vaporized in a high-temperature, oxygen-free chamber
- no oxygen = no burning = no smoke/pollution + maximum retention of energy content value and yield
- Vapors are extracted from chamber and condensed into crude oil which is refined into diesel and gasoline
- Solid carbon residue is extracted from chamber and processed into carbon black
- Metal content from tires is separated and recovered
- Non-condensable gases used as fuel to heat chamber, excess heat used for steam to help power system